Common gravel and crushed stone typically cost about $30–$75 per ton before delivery nationally, which works out to roughly $40–$100 per cubic yard, since a yard weighs about 1.4–1.5 tons. Delivery typically adds $10–$25 per ton or a flat truck fee, and decorative stone runs much higher. Our published delivered price for gravel starts at $25 per cubic yard in Dallas–Fort Worth and $30 per cubic yard in Denver, with a 10-yard minimum.
Typical gravel prices by type (national ranges)
These are typical market ranges compiled from published supplier and cost-guide figures. Local prices vary a lot with distance to the quarry, fuel and order size.
| Material | Typical per ton | Typical per cubic yard |
|---|---|---|
| Road base / crusher run / flex base | $15–$35 | $20–$50 |
| Crushed limestone | $25–$50 | $35–$70 |
| #57 crushed stone | $25–$55 | $35–$75 |
| Crushed granite | $30–$60 | $40–$85 |
| Pea gravel | $30–$55 | $40–$75 |
| River rock / decorative stone (context) | $50–$150+ | $70–$200+ |
Ranges are material prices before delivery and before tax unless your supplier quotes delivered. They are conservative midpoints of published ranges, not quotes.
Gravel cost per yard vs per ton
Quarries and big yards usually sell by the ton because they weigh trucks on a scale. Delivery companies and landscape yards often sell by the cubic yard because that is how you plan a project. To compare:
- Per-yard price ≈ per-ton price × 1.4–1.5 for most gravel and crushed stone.
- Per-ton price ≈ per-yard price ÷ 1.4–1.5.
- Road base is denser, about 1.5–1.6 tons per compacted yard.
The tons to cubic yards calculator does the conversion for any material, so you can compare a per-ton quote to a per-yard quote fairly.
How much is a truckload of gravel?
A truckload price depends on the truck size and the distance. Nationally, a delivered dump-truck load of common gravel typically runs from a few hundred dollars for a small tandem load to $1,000 or more for a large trailer load, plus or minus distance. Truck sizes we run:
| Truck | Typical load | Approx. area at 4" deep |
|---|---|---|
| Tandem axle | 10 yd³ | About 810 sq ft |
| Tri-axle | 16 yd³ | About 1,300 sq ft |
| End dump | 18 yd³ | About 1,460 sq ft |
Gravel is heavy, roughly 1.4–1.5 tons per yard, so legal weight limits matter more than with dirt. We confirm how many yards go on each truck when you order. See dump truck load sizes for more.
Our delivered gravel prices
| Market | Gravel, delivered | Minimum |
|---|---|---|
| Dallas–Fort Worth | Starting at $25/yd | 10 yards |
| Denver | Starting at $30/yd | 10 yards |
That is a delivered starting price, not a pickup price. Your final price depends on the specific stone, quantity and distance, and we confirm it before the truck is scheduled. For a fast estimate on yards, use the gravel calculator.
Delivered vs pickup: which is cheaper?
Picking up yourself skips the delivery fee, but it is rarely cheaper beyond a yard or two. A cubic yard of gravel weighs 2,800–3,000 lbs. Most half-ton pickups have a payload rating under that, so one yard can overload them. Even a 3/4-ton or one-ton truck usually tops out around 1–2 yards. A 10-yard job would take five or more trips, plus loader time at the yard and fuel. Once you are above a few yards, delivery is almost always the better deal. More in dump truck delivery vs renting a dump trailer.
What drives the cost of gravel?
- Distance from the quarry. Trucking is often the biggest part of the price. The farther the job, the more it costs.
- Type of stone. Base and local crushed rock are cheapest. Washed, screened or imported decorative stone costs more.
- Local geology. Limestone is plentiful and economical in Texas. Granite is local in Colorado. Hauling a rock type from another region adds freight.
- Quantity. Full truckloads cost less per yard than partial loads.
- Access. Tight streets, soft ground or long backing distances can change the truck size.
- Spreading and installation. Delivery usually means a dump in one spot. Spreading, grading and compacting are labor on top.
Gravel cost examples
| Project | Yards needed | DFW delivered, starting at | Denver delivered, starting at |
|---|---|---|---|
| 12 × 40 driveway, 4" top | About 6 (10-yd minimum) | $250 for 10 yd | $300 for 10 yd |
| 12 × 40 driveway, 6" base | About 9 (order 10) | $250 | $300 |
| 20 × 40 parking pad, 6" | About 15 (order 16) | $400 | $480 |
| 10 × 100 driveway, 6" | About 18.5 (order 18–20) | $450–$500 | $540–$600 |
These multiply our starting per-yard price by the yardage. They are material and delivery only, and the actual stone you choose sets the final number. Driveway depth guidance is in how deep should driveway gravel be.
How much does it cost to install a gravel driveway?
Material is only part of it. Stripping topsoil, grading a crown, laying fabric and compacting base in lifts is equipment work. In DFW our road and driveway preparation service handles that, and we quote per job: send the size, photos or plans through the bid form.
Get a gravel price
Text (469) 253-2403 in DFW and Texas or (720) 577-5016 in Denver with your address, the gravel type and how many yards you need. Not sure which gravel? Start with types of gravel. Every material we deliver is listed on services.