How to calculate how much gravel you need
- Measure length and width in feet. For a circle, area = 3.1416 × (diameter ÷ 2)².
- Convert depth to feet: inches ÷ 12.
- Multiply area × depth to get cubic feet, then divide by 27 to get cubic yards.
- Add 10% for settling and spillage and round up to a whole yard.
Example: a 20 × 12 ft area at 4 inches is 20 × 12 × 0.333 = 80 cu ft. 80 ÷ 27 = 2.96 cubic yards, or about 4 yards to order, weighing roughly 4.6 tons.
How deep should it be?
| Project | Depth | Notes |
|---|---|---|
| Gravel driveway (new, on clay) | 8–12 in total | 4–6 in road base, 4 in crushed stone, 2–3 in top course |
| Driveway refresh / top layer | 2–3 in | Over an existing compacted base |
| Walkway or patio base | 4 in | Road base, compacted, under pavers or flagstone |
| RV or shed pad | 4–6 in | Over compacted fill or select fill |
| French drain / drainage trench | Full trench | Clean #57 stone around perforated pipe |
| Decorative bed cover | 2–3 in | Pea gravel over landscape fabric |
How much does one cubic yard cover?
| Depth | Sq ft per yard | Yards per 100 sq ft | Yards per 1,000 sq ft |
|---|---|---|---|
| 2 in | 162 | 0.62 | 6.2 |
| 3 in | 108 | 0.93 | 9.3 |
| 4 in | 81 | 1.23 | 12.3 |
| 6 in | 54 | 1.85 | 18.5 |
| 8 in | 41 | 2.47 | 24.7 |
| 12 in | 27 | 3.7 | 37 |
Measured volume. Add 10% for settling when ordering.
Weight and delivered price per yard
| Material | Tons per yd³ | Yd³ per ton | DFW from | Denver from |
|---|---|---|---|---|
| Crushed limestone | 1.4–1.5 | 0.71 | $25/yd | $30/yd |
| Crushed granite | 1.4–1.5 | 0.71 | $25/yd | $30/yd |
| #57 stone | 1.35–1.45 | 0.71 | $25/yd | $30/yd |
| Pea gravel | 1.3–1.45 | 0.71 | $25/yd | $30/yd |
| Road base / flex base | 1.5–1.6 | 0.65 | $25/yd | $30/yd |
Weights are typical; wet material is heavier. Prices are published starting prices, delivered, 10-yard minimum. Other metros: see your city's service page.
Common questions
How much area does a yard of gravel cover?
One cubic yard covers 162 sq ft at 2 inches, 108 sq ft at 3 inches, 81 sq ft at 4 inches and 54 sq ft at 6 inches.
How many tons is a yard of gravel?
About 1.4 tons (2,800 lbs) for crushed stone, #57 or pea gravel, and about 1.55 tons for compacted road base. Wet or very fine material weighs more.
How much gravel do I need for a driveway?
A 12 × 40 ft driveway at 4 inches takes about 6 cubic yards; at 8 inches (a full new build), about 12 yards. Enter your size above for an exact number.
Should I add extra gravel for compaction?
Yes. Clean stone like #57 and pea gravel settles about 5%; road base compacts 15% or more. The calculator adds that allowance and rounds up to a whole yard.
Is it cheaper to buy gravel by the bag or by the yard?
Bulk wins above about 1 yard. One yard is 54 half-cubic-foot bags. Delivered bulk gravel starts at $25 a yard in DFW with a 10-yard minimum.
Related guides
- Types of Gravel: Sizes, Uses and a Comparison Chart
- Best Gravel for a Driveway: Base, Middle and Top Layers
- How Deep Should Driveway Gravel Be? Depth by Layer and Soil
- What Is #57 Stone? Size, Uses, Weight and Coverage
- How Much Does Gravel Cost? Per Yard, Per Ton and Per Truckload
- Fill Dirt for Driveway Base & Repair
More calculators
Not sure what to order?
Text your measurements and a photo of the area. We'll tell you the material, the yards, and the delivered price. DFW: text (469) 253-2403 · Denver: text (720) 577-5016.