How it's calculated
- Top area = pad length × width. With side slope S:1, the base grows by 2 × S × height in each direction.
- Volume uses the prismoidal formula: height ÷ 6 × (top area + base area + 4 × mid-height area). It is exact for a sloped rectangular pad.
- Divide cubic feet by 27, then add 15–25% because loose fill compacts. Your soils report and engineer set the material, lift thickness and density.
Common sizes
| Project | Structural / select fill (yd³) |
|---|---|
| 40 × 30 ft shop pad, 1 ft, 3:1 | 64 |
| 60 × 50 ft house pad, 2 ft, 3:1 | 330 |
| 60 × 50 ft, 2 ft, formed edges | 267 |
| 70 × 50 ft house pad, 3 ft, 3:1 | 626 |
Yards to order, allowances included, rounded up.
Weight and delivered price per yard
| Material | Tons per yd³ | Yd³ per ton | DFW from | Denver from |
|---|---|---|---|---|
| Structural / select fill | 1.2–1.4 | 0.77 | $20/yd | $25/yd |
| Fill dirt | 1.1–1.3 | 0.83 | $10/yd | $15/yd |
Weights are typical; wet material is heavier. Prices are published starting prices, delivered, 10-yard minimum. Other metros: see your city's service page.
Common questions
How much fill do I need for a house pad?
Typical home pads take 150 to 600 cubic yards. A 60 × 50 ft pad 2 ft high with 3:1 slopes needs about 330 yards of select fill, compaction allowance included.
Why do side slopes matter so much?
The slopes add a wedge of fill all the way around. On a 2 ft pad with 3:1 slopes that is about 52 extra yards, almost a quarter more than the flat-box math.
What fill goes in a building pad?
Select or structural fill as specified in the soils report, placed in 6–8 in lifts and tested for density, typically to 95% Standard Proctor. Native clay is usually not allowed under slabs in North Texas.
How much should I add for compaction?
Plan 15–25%. Loose select fill shrinks when it is rolled to spec, and running short mid-pad costs a day.
Do you build pads too?
In DFW, yes: we build pads to your plans and soils report as part of our site work, quoted per job. Elsewhere we deliver the fill.
Related guides
- How Much Does It Cost to Build a House Pad in Texas?
- What Is Select Fill? Specs, Uses and How It Differs From Structural Fill
- What Is a Proctor Test? Standard vs Modified Proctor and 95% Compaction
- What Is Structural Fill? (When You Need It vs Regular Fill Dirt)
- Fill Dirt for New Home Construction: A Builder's Guide
More calculators
Not sure what to order?
Text your measurements and a photo of the area. We'll tell you the material, the yards, and the delivered price. DFW: text (469) 253-2403 · Denver: text (720) 577-5016.