How to calculate cubic yards
- Measure length and width in feet. For a circle, area = 3.1416 × (diameter ÷ 2)².
- Convert depth to feet: inches ÷ 12.
- Multiply area × depth to get cubic feet, then divide by 27 to get cubic yards.
- Add 10% for settling and spillage and round up to a whole yard.
Example: a 20 × 12 ft area at 6 inches is 20 × 12 × 0.5 = 120 cu ft. 120 ÷ 27 = 4.44 cubic yards, or about 5 yards to order, weighing roughly 5.9 tons.
How deep should it be?
| Project | Depth | Notes |
|---|---|---|
| Leveling a yard | 2–6 in | Fill dirt, topsoil on top |
| Filling a pool | Full depth | Fill dirt in compacted lifts |
| Building pad | 1–3 ft | Select or structural fill, tested |
| Driveway base | 6–8 in | Road base |
| New lawn | 4–6 in | Screened topsoil |
| Raised beds | 12–18 in | Fill dirt base, topsoil top |
How much does one cubic yard cover?
| Depth | Sq ft per yard | Yards per 100 sq ft | Yards per 1,000 sq ft |
|---|---|---|---|
| 1 in | 324 | 0.31 | 3.1 |
| 2 in | 162 | 0.62 | 6.2 |
| 3 in | 108 | 0.93 | 9.3 |
| 4 in | 81 | 1.23 | 12.3 |
| 6 in | 54 | 1.85 | 18.5 |
| 12 in | 27 | 3.7 | 37 |
Measured volume. Add 10% for settling when ordering.
Weight and delivered price per yard
| Material | Tons per yd³ | Yd³ per ton | DFW from | Denver from |
|---|---|---|---|---|
| Fill dirt | 1.1–1.3 | 0.83 | $10/yd | $15/yd |
| Screened topsoil | 1.0–1.1 | 0.95 | $17/yd | $22/yd |
| Sand | 1.3–1.5 | 0.71 | $22/yd | $27/yd |
| Structural / select fill | 1.2–1.4 | 0.77 | $20/yd | $25/yd |
| Crushed limestone | 1.4–1.5 | 0.71 | $25/yd | $30/yd |
| Road base / flex base | 1.5–1.6 | 0.65 | $25/yd | $30/yd |
Weights are typical; wet material is heavier. Prices are published starting prices, delivered, 10-yard minimum. Other metros: see your city's service page.
Common questions
How do you calculate cubic yards?
Multiply length × width × depth in feet, then divide by 27, because one cubic yard is 3 × 3 × 3 = 27 cubic feet.
How many square feet does a cubic yard cover?
324 sq ft at 1 inch, 108 at 3 inches, 81 at 4 inches, 54 at 6 inches and 27 at 12 inches.
How do I calculate cubic yards for a circle?
Area = 3.1416 × radius² in feet. Multiply by depth in feet and divide by 27. Choose "Circle" above and enter the diameter.
How many cubic yards are in a dump truck?
A tandem dump truck carries about 10 yards, a tri-axle about 16 and an end-dump trailer about 18, less for heavy wet material.
How many cubic feet are in a cubic yard?
27 cubic feet.
Related guides
More calculators
Not sure what to order?
Text your measurements and a photo of the area. We'll tell you the material, the yards, and the delivered price. DFW: text (469) 253-2403 · Denver: text (720) 577-5016.