See today’s confirmed same-day availability, or text (469) 253-2403 for instant pricing
Fill Dirt Near Me

Pool Fill-In Calculator

Multiply the pool surface area by its average depth and divide by 27, then add about 20% because fill dirt compacts. A 16 × 32 ft pool averaging 5.75 ft deep is a 109 cubic yard hole: order about 120 yards of fill dirt plus 11 yards of topsoil for a 6-inch grass cap.

Ignored for round pools

For grass on top. 0 if you will pave over it

What to order

  • Fill dirt120 yd³

    Fill dirt, placed and compacted in lifts. Includes 20% allowance · ≈144 tons · 12 tandem loads

    120 yd × $10/yd = $1,200

  • Screened topsoil11 yd³

    Topsoil cap for grass. Includes 10% allowance · ≈11.6 tons · 2 tandem loads

    11 yd × $17/yd = $187

Surface area
512 sq ft
Average depth
5.8 ft
Hole volume
109 yd³

Delivered price in your city

Materials delivered, starting at$1,387

Published starting prices; each material is a separate load with a 10-yard minimum. Dispatch confirms with your address. Spreading and compaction are not included.

or text (469) 253-2403

How it's calculated

  1. Surface area: length × width for a rectangle, 0.785 × length × width for an oval or kidney, 0.785 × diameter² for a round pool.
  2. Average depth = (shallow end + deep end) ÷ 2.
  3. Fill dirt = area × (average depth − topsoil cap) ÷ 27, plus 20% for compaction in 6–12 in lifts.
  4. Topsoil cap = area × cap depth ÷ 27, plus 10% for settling.

Common sizes

ProjectFill dirt (yd³)Screened topsoil (yd³)
12 × 24 ft, 3.5–6.5 ft deep586
16 × 32 ft, 3.5–8 ft deep12011
18 × 36 ft, 3.5–7.5 ft deep14414
20 × 40 ft, 3.5–8.5 ft deep19617

Yards to order, allowances included, rounded up.

Weight and delivered price per yard

MaterialTons per yd³Yd³ per tonDFW fromDenver from
Fill dirt1.1–1.30.83$10/yd$15/yd
Screened topsoil1.0–1.10.95$17/yd$22/yd

Weights are typical; wet material is heavier. Prices are published starting prices, delivered, 10-yard minimum. Other metros: see your city's service page.

Common questions

How much dirt does it take to fill in a pool?

Most backyard inground pools take 60 to 200 cubic yards of fill dirt. A 16 × 32 ft pool averaging 5.75 ft deep needs about 120 yards of fill plus 11 yards of topsoil.

Why order 20% more fill than the hole volume?

Loose fill dirt compacts when it is placed in lifts and rolled, so the same yards take up less space in the ground. Skipping the allowance leaves a sinking low spot.

Does the broken pool shell reduce how much dirt I need?

A little. If the walls are broken and left in the bottom, the rubble takes some volume, but most demolition plans remove the top 18–36 in of shell, so plan on the full hole volume.

Do I need topsoil on top of a filled pool?

Only if grass is going back. Six inches of screened topsoil over compacted fill grows sod or seed; under a patio or slab use compacted fill all the way up.

How many truckloads to fill a pool?

About one 10-yard tandem load per 10 yards: a 120-yard fill is 12 tandem loads or 7 end-dump loads.

Related guides

More calculators

Not sure what to order?

Text your measurements and a photo of the area. We'll tell you the material, the yards, and the delivered price. DFW: text (469) 253-2403 · Denver: text (720) 577-5016.

Your project starts with
the right dirt.

Text us what you need. Quoted in minutes. Delivered in hours.

Text for instant quote

Mon–Sat 7am–5pm · Responses in minutes