How it's calculated
- Drainage zone = wall length × total wall height (including buried courses) × zone width (12 in is typical for segmental block walls).
- Leveling pad = wall length × pad width × pad depth (often 24 in wide and 6 in deep of compacted base).
- Divide each by 27; add 5% for clean stone and 15% for road base. Follow the block manufacturer and, for taller walls, the engineer.
Common sizes
| Project | #57 stone (yd³) | Road base / flex base (yd³) |
|---|---|---|
| 20 ft wall, 2 ft tall | 2 | 1 |
| 40 ft wall, 3 ft tall | 5 | 2 |
| 60 ft wall, 4 ft tall | 10 | 3 |
Yards to order, allowances included, rounded up.
Weight and delivered price per yard
| Material | Tons per yd³ | Yd³ per ton | DFW from | Denver from |
|---|---|---|---|---|
| #57 stone | 1.35–1.45 | 0.71 | $25/yd | $30/yd |
| Road base / flex base | 1.5–1.6 | 0.65 | $25/yd | $30/yd |
Weights are typical; wet material is heavier. Prices are published starting prices, delivered, 10-yard minimum. Other metros: see your city's service page.
Common questions
What is the best backfill for a retaining wall?
Clean #57 stone in the first 12 inches behind the wall, with a perforated drain pipe at the base, then compacted soil beyond that. Clay right against the wall traps water and pushes it over.
How much gravel behind a retaining wall?
About 1 cubic yard per 27 sq ft of wall face for a 12-inch zone. A 40 × 3 ft wall takes roughly 4.7 yards with allowance.
What goes under a retaining wall?
A compacted leveling pad of road base, typically 6 inches deep and about twice the block depth wide, with the first course partly buried.
Do retaining walls need an engineer?
Many cities require engineered plans above about 4 ft of exposed height or when the wall holds back a slope, driveway or structure. Check your local code.
Related guides
More calculators
Not sure what to order?
Text your measurements and a photo of the area. We'll tell you the material, the yards, and the delivered price. DFW: text (469) 253-2403 · Denver: text (720) 577-5016.