Road base is a blend of crushed rock ranging from about 1-1/2" down to fine dust, designed to compact into a dense, load-bearing layer under driveways, roads, parking areas and slabs. It goes by different names by region: flex base in Texas, Class 6 road base in Colorado, crusher run or ABC (aggregate base course) in the Southeast and Mid-Atlantic, and dense grade aggregate (DGA) or 21A in other states. Compacted, it weighs about 1.5–1.6 tons per cubic yard.
What is road base made of?
Road base is crushed rock with a full range of particle sizes: larger stones for strength, medium pieces to fill gaps, and fines (dust and sand-sized particles) to fill the gaps between those. That "well-graded" mix is the whole point. When it is moistened and compacted, the small particles pack into the voids between the large ones, leaving very little empty space. The result is a layer that carries weight and resists rutting.
The rock itself depends on what is local. In North Texas, it is almost always crushed limestone. Along the Colorado Front Range, it is crushed granite or other hard rock, and recycled concrete or asphalt blends are also sold as Class 6. In other regions you will see crushed gravel, trap rock or recycled material.
Road base names by region
| Name | Where you hear it | Notes |
|---|---|---|
| Flex base (flexible base) | Texas | TxDOT Item 247; usually crushed limestone |
| Class 6 road base | Colorado | CDOT aggregate base course class; virgin or recycled |
| Crusher run | Southeast, Mid-Atlantic | Crusher output with fines left in |
| ABC (aggregate base course) | Carolinas, Southeast | DOT base material |
| Dense grade aggregate (DGA), 21A, QP | Kentucky, Virginia, Northeast | Same concept, local spec names |
| 3/4" minus / 1-1/2" minus | West, nationwide yards | Named by top size; "minus" means it includes everything smaller |
What is TxDOT Item 247 flex base?
Texas Department of Transportation Item 247 is the state specification for flexible base. It sorts base into types by source (for example, Type A is crushed stone from a single quarried source) and grades by gradation and quality, with tests for gradation, plasticity and strength. Contractors in Texas often order flex base by these labels. For a home driveway or shed pad, you do not need a TxDOT-certified grade. For city streets, commercial lots and anything on an engineered plan, order the exact type and grade the plans list, and expect the engineer or inspector to verify compaction.
How does road base compact?
Road base reaches its best density at the right moisture. Too dry and the fines cannot slide into the voids. Too wet and water holds the particles apart. In practice:
- Place in lifts of about 3–4" loose (thicker lifts only with heavy rollers).
- Moisten until it is damp enough to hold together when squeezed, but not shiny or pumping.
- Compact with a plate compactor (small areas), jumping jack or roller.
- Repeat until you reach the finished depth.
Engineered work specifies a percent of maximum density from a lab Proctor test, commonly 95% or higher, and is verified with field density testing. Loose road base loses volume when compacted, so order typically 10–20% more than the finished volume. The compaction principles are the same as in our fill compaction guide.
What is road base used for?
- Gravel driveway base and surface (see best gravel for a driveway)
- Parking lots, RV and boat pads, equipment yards
- Base under concrete slabs, pavers and asphalt
- Shed and storage building pads
- Ranch and farm roads, construction entrances
- Leveling and building up low traffic areas
Road base vs other gravel
| Property | Road base / flex base | #57 stone | Pea gravel |
|---|---|---|---|
| Size | About 1-1/2" to dust | About 1/2"–1", clean | About 1/4"–1/2", rounded |
| Compacts | Yes, very hard | Seats only | No |
| Drains | Poorly (sheds water) | Freely | Freely |
| Load bearing | Excellent | Good when confined | Poor |
| Weight | ≈1.5–1.6 tons/yd³ compacted | ≈1.4–1.5 tons/yd³ | ≈1.4 tons/yd³ |
More options in types of gravel.
Downsides of road base
- Dust in long dry spells, and some mud if it is high in clay fines and stays wet.
- Does not drain, so it must be crowned and never used as a French drain or wall backfill.
- Needs compaction. Dumped and spread without rolling, it stays soft.
How much road base do I need?
| Area | 4" compacted | 6" compacted |
|---|---|---|
| 10 × 12 shed pad | 1.5 yd³ | 2.2 yd³ |
| 12 × 40 driveway | 5.9 yd³ | 8.9 yd³ |
| 14 × 40 RV pad | 6.9 yd³ | 10.4 yd³ |
| 20 × 40 parking pad | 9.9 yd³ | 14.8 yd³ |
Add typically 10–20% for compaction. Use the gravel calculator for your dimensions, and the tons to cubic yards calculator if your spec is in tons.
Order road base or flex base
We deliver crushed limestone flex base in Texas and road base in Colorado. Gravel and base delivery starts at $25/yd in DFW and $30/yd in Denver, 10-yard minimum. Text (469) 253-2403 (DFW and Texas) or (720) 577-5016 (Denver). If your plans list a specific TxDOT type and grade, include it in the text. For the base placed and compacted in DFW, see road and driveway preparation, quoted per job through the bid form. All materials are on services.