#57 stone (also written No. 57 or 57 gravel) is clean crushed rock with most pieces between about 1/2" and 1", and almost no dust or fines. A cubic yard weighs about 1.4–1.5 tons (2,800–3,000 lbs) and covers about 81 square feet at 4" deep. It is the standard stone for French drains, retaining wall backfill, drainage layers under slabs and the middle course of a layered gravel driveway.
What does the "57" mean?
The number comes from the standard size tables for coarse aggregate: ASTM D448 and its highway twin AASHTO M 43. Those tables assign size numbers to gradation bands. Size No. 57 is a blend of No. 5 (roughly 1" to 1/2") and No. 7 (roughly 1/2" to No. 4 sieve), which is where the two digits come from. In general terms, the No. 57 band looks like this:
| Sieve size | Percent passing (No. 57 band) |
|---|---|
| 1-1/2" | 100% |
| 1" | 95–100% |
| 1/2" | 25–60% |
| No. 4 (about 3/16") | 0–10% |
| No. 8 (about 3/32") | 0–5% |
In plain English: nothing larger than 1-1/2", nearly everything under 1", a good share between 1/2" and 1", and very little sand-sized material. That last line is the important one. The lack of fines is what makes #57 drain. State DOTs adopt the same size numbers with small local changes, and a quarry's actual product will sit somewhere inside the band.
What is #57 stone used for?
- French drains and trench drains. #57 surrounds perforated pipe, usually wrapped in filter fabric so soil does not migrate in. See our French drain guide.
- Behind retaining walls. A 12" or wider zone of clean stone directly behind the wall relieves water pressure. The wall manufacturer or engineer sets the exact width. More in fill dirt for retaining walls.
- Under slabs and patios. A layer of clean stone acts as a capillary break and drainage layer.
- Driveway middle course. In a three-layer driveway, #57 sits between a coarse base and a finer top.
- Pipe and culvert bedding. Where the plans allow clean stone bedding.
- Mud control. Around barns, gates and equipment pads where water needs to get off the surface.
What #57 stone is not good for
On its own, #57 is not a great top surface for a driveway. Because it has no fines, it does not bind into a solid crust, and a 1" stone can roll under tires and scatter. It also does not compact the way road base does: you can seat it with a plate compactor, but you cannot densify it like flex base. Use it as a drainage or intermediate layer, then cap traffic areas with a material that has fines.
How much does #57 stone weigh?
#57 weighs about 2,800–3,000 lbs per cubic yard (1.4–1.5 tons), roughly 100–110 lbs per cubic foot. Limestone and granite versions run close to each other. Because it is clean, rain does not change its weight much: water drains out instead of soaking in. To convert a quote in tons, use the tons to cubic yards calculator.
How much area does a yard of #57 cover?
| Depth | Coverage per cubic yard | Typical use |
|---|---|---|
| 2" | 162 sq ft | Thin top dressing |
| 3" | 108 sq ft | Under a patio or walkway |
| 4" | 81 sq ft | Drainage layer, driveway middle course |
| 6" | 54 sq ft | Heavy drainage layer, pad |
| 12" | 27 sq ft | Wall backfill zone, trench fill |
The math: 1 cubic yard is 27 cubic feet. Multiply length × width × depth in feet, then divide by 27. Or let the gravel calculator do it.
How much #57 for a French drain?
For a trench, multiply trench length × width × depth (in feet) and divide by 27, then subtract a little for the pipe. A 100 ft trench that is 12" wide and 18" deep holds 150 cubic feet, about 5.6 yards. A 4" pipe takes up less than 9 cubic feet over that length, so most people round to 5–6 yards. Since delivery has a 10-yard minimum, many customers use the remainder as a drainage layer or a pad.
#57 vs other common stones
| Material | Size | Drains? | Compacts? |
|---|---|---|---|
| #57 stone | About 1/2"–1" | Yes, freely | Seats, does not densify |
| #8 / #89 stone | About 3/8" | Yes | Seats |
| Pea gravel | About 1/4"–1/2", rounded | Yes | No, rolls |
| Road base / flex base | 1-1/2" to dust | Poorly | Yes, very well |
See the full lineup in types of gravel.
Is #57 stone limestone or granite?
Either. "57" describes size, not rock type. In Dallas–Fort Worth, #57 is almost always crushed limestone. Around Denver it is more often granite or another hard local rock. Both work the same way for drainage. For a visible surface, granite tends to hold its color and shape longer.
Order #57 stone
We deliver #57 stone in DFW and Denver. Gravel delivery starts at $25/yd in DFW and $30/yd in Denver, 10-yard minimum. Text (469) 253-2403 (DFW and Texas) or (720) 577-5016 (Denver) with your address and yardage. If the drain or wall is part of a bigger grading job, see drainage solutions, which we quote per job.