A cubic yard is a volume 3 feet long, 3 feet wide and 3 feet tall, which equals 27 cubic feet or about 0.765 cubic meters. It is the standard unit for buying bulk dirt, topsoil, sand and gravel. One cubic yard covers 324 square feet at 1 inch deep, 108 square feet at 3 inches, 81 square feet at 4 inches and 54 square feet at 6 inches.
How big is a cubic yard?
Picture a cube about as tall as a kitchen counter is high, and as wide and deep. Some other ways to see it:
- About the size of a washing machine and dryer side by side, a bit taller.
- About 7 to 9 trips with a standard 6 cubic foot wheelbarrow, since a load you can actually push is 3 to 4 cubic feet.
- About 202 US gallons, or 54 five-gallon buckets filled level.
- A standard full-size pickup bed holds roughly 2 to 3 cubic yards by volume, but a yard of dirt weighs over a ton, so most half-ton pickups are overloaded with even one yard.
The math: how to calculate cubic yards
Measure length, width and depth in feet. Multiply them to get cubic feet, then divide by 27.
Cubic yards = length (ft) × width (ft) × depth (ft) ÷ 27
Depth is usually given in inches, so divide inches by 12 first. Example: a 20 × 30 ft area filled 4 inches deep is 20 × 30 × 0.333 = 200 cubic feet, ÷ 27 = 7.4 cubic yards. The cubic yards calculator does this for rectangles, circles and irregular areas.
Volume conversions
| Unit | Equals |
|---|---|
| 1 cubic yard | 27 cubic feet |
| 1 cubic yard | 46,656 cubic inches |
| 1 cubic yard | 0.7646 cubic meters |
| 1 cubic yard | ≈202 US gallons |
| 1 cubic meter | 1.308 cubic yards (35.31 cubic feet) |
| 1 cubic foot | 0.037 cubic yards |
| 10 cubic yards (tandem truck) | 270 cubic feet, 7.65 cubic meters |
Cubic yards to tons by material
A cubic yard is a volume, a ton is a weight, so the conversion depends on the material. Moisture matters too: wet dirt and sand weigh noticeably more than dry.
| Material | Tons per yd³ | Lbs per yd³ | Yd³ per ton |
|---|---|---|---|
| Fill dirt | ≈1.1–1.3 (1.2 typical) | 2,000–2,600 | ≈0.8 |
| Screened topsoil | ≈1.0–1.1 | 2,000–2,200 | ≈0.9–1.0 |
| Sand | ≈1.3–1.5 | 2,600–3,000 | ≈0.7 |
| Gravel / crushed stone | ≈1.4–1.5 | 2,800–3,000 | ≈0.7 |
| Pea gravel | ≈1.4 | ≈2,800 | ≈0.7 |
| Road base / flex base | ≈1.5–1.6 compacted | 3,000–3,200 | ≈0.65 |
If your plan or a quarry ticket is in tons, use the tons to cubic yards calculator. For more detail on weights, see how much a cubic yard of dirt weighs.
How much area does a cubic yard cover?
One cubic yard spread evenly covers 324 square feet at 1 inch. Divide 324 by the depth in inches for any other depth.
| Depth | Sq ft per cubic yard | Yd³ per 1,000 sq ft | Typical use |
|---|---|---|---|
| 1/2 in | 648 | 1.5 | Lawn topdressing |
| 1 in | 324 | 3.1 | Light leveling |
| 2 in | 162 | 6.2 | Leveling, sand under pavers |
| 3 in | 108 | 9.3 | Gravel paths |
| 4 in | 81 | 12.3 | Topsoil for sod, gravel driveway layer |
| 6 in | 54 | 18.5 | Topsoil for new lawns, garden beds |
| 12 in | 27 | 37 | Raising grade, pads, raised beds |
Worked examples
- Garden bed, 4 × 12 ft, 12 inches deep: 4 × 12 × 1 = 48 ft³ ÷ 27 = 1.8 yd³ of topsoil.
- New lawn, 50 × 40 ft, 4 inches of topsoil: 50 × 40 × 0.333 = 667 ft³ ÷ 27 = 24.7 yd³. Add 10% for settling and order about 27 yards. Check it in the topsoil calculator.
- Gravel driveway, 12 × 60 ft, 4 inches: 12 × 60 × 0.333 = 240 ft³ ÷ 27 = 8.9 yd³, about 12.4–13.3 tons at 1.4–1.5 tons per yard.
- Round pool fill, 24 ft diameter, 4 ft deep (average): 3.1416 × 12 × 12 × 4 = 1,810 ft³ ÷ 27 = 67 yd³, plus 20–30% for compaction, so roughly 80–87 yards of fill dirt.
For circles, use area = 3.1416 × radius × radius, then multiply by depth. For irregular shapes, break the area into rectangles and triangles, calculate each, and add them up.
Common mistakes when ordering by the yard
- Forgetting to convert inches to feet. Multiplying by 4 instead of 0.333 for a 4-inch depth overstates the order twelve times over.
- Confusing square yards and cubic yards. Square yards measure area (9 square feet). Cubic yards measure volume (27 cubic feet).
- Treating tons and yards as equal. A yard of gravel is close to 1.5 tons; a yard of topsoil is close to 1 ton.
- Ordering exact volume for compacted work. Loose material shrinks under a roller.
Loose yards vs compacted yards
Bulk material is sold by the loose cubic yard, as it sits in the truck. Fill dirt and base materials shrink when they are compacted, often by 15–30% for fill depending on the soil and how hard it is rolled. If your plan specifies 100 compacted yards, order more than 100 loose. Topsoil for lawns and beds also settles a little after watering, so plan on 10–15% extra.
How many cubic yards in a dump truck?
| Truck | Typical load |
|---|---|
| Tandem axle dump truck | 10 yd³ |
| Tri-axle dump truck | 16 yd³ |
| End dump trailer | 18 yd³ |
Heavy materials like gravel and sand can hit legal weight limits before a truck is full by volume, which is why the same truck may carry fewer yards of rock than of topsoil. See dump truck load sizes.
Price per cubic yard
Delivered prices in DFW start at $10/yd for fill dirt, $17/yd for screened topsoil, $20/yd for structural or select fill, $22/yd for sand and $25/yd for gravel. Denver runs $5/yd more (fill $15, topsoil $22, sand $27, gravel $30). The minimum order is 10 yards. Get a delivered total from the fill dirt calculator or the topsoil calculator, or text your measurements to (469) 253-2403 (DFW) or (720) 577-5016 (Denver).