See today’s confirmed same-day availability, or text (469) 253-2403 for instant pricing
Fill Dirt Near Me

How to Topdress a Lawn With Topsoil or Sand (Depth, Timing, Quantities)

Updated November 2026

To topdress a lawn, spread a thin layer of screened topsoil, sand or a topsoil-sand blend, usually 1/4 to 1/2 inch per pass, then work it into the turf with the back of a rake or a leveling rake so the grass blades still poke through. That depth takes about 0.8 to 1.5 cubic yards per 1,000 square feet. In DFW, topdress warm-season grasses like bermuda and St. Augustine from late spring through summer, when the grass is actively growing and can push up through the new layer quickly.

Why topdress a lawn?

  • Smooth out bumps and shallow dips. The most common reason. Repeated thin layers fill low spots without smothering grass.
  • Improve the surface soil over hard, compacted clay, especially when combined with core aeration.
  • Help thin areas fill in by giving runners and new shoots loose soil to root into.

Topdressing is not the fix for a dip deeper than about an inch, a yard that holds water against the house, or a full regrade. For those, see how to level a yard or our grading service.

How thick should topdressing be?

The rule: never bury more than about half the grass blade height. For most lawns that means 1/4 to 1/2 inch per pass. To fill a 1 to 2 inch dip, apply several thin passes a few weeks apart, letting the grass grow through each one.

Grass typeMax per passNotes
Bermuda (common or hybrid)1/4–1/2 inVery tolerant; recovers fast in summer
Zoysia1/4–1/2 inSlower to grow through; stay on the thin side
St. AugustineAbout 1/4 inThick, coarse blades; heavy layers can smother it
BuffalograssAbout 1/4 inLow-growing; go light
Kentucky bluegrass / tall fescue (Denver)1/4–1/2 inTopdress in cool, active-growth periods

When to topdress in DFW and Denver

Topdress when the grass is actively growing, so it recovers in days, not weeks.

  • DFW and North Texas (warm-season grasses): late spring through summer, roughly May through August, after the lawn has fully greened up. Avoid early spring dormancy and late fall.
  • Denver and the Front Range (cool-season grasses): late summer to early fall is usually best, with mid to late spring as a second window. Avoid the hottest part of summer.

Aerating right before topdressing lets some of the material fall into the holes, which helps loosen compacted clay over time.

What material to use for topdressing

MaterialProsCons
Screened topsoilMatches most native lawn soils; holds moisture and nutrientsCan carry weed seeds; clay-heavy soil can crust
SandSpreads easily, drains well, levels preciselyRepeated pure sand over clay can create layers that drain unevenly
Topsoil-sand blend (homeowner mixed)Spreads easier than straight topsoil; better structureTakes mixing on site

The safest rule is to use a material similar in texture to the soil already under your lawn, so water moves evenly from one layer to the next. On golf greens, which are built on sand, pure sand topdressing is standard. On a typical North Texas clay-loam lawn, screened topsoil or a topsoil and sand mix is the more common choice. Material must be dry enough to spread. Wet topsoil clumps and will not work into the turf. See what screened topsoil is for screen sizes.

How much topdressing do you need?

One cubic yard covers 648 square feet at 1/2 inch, or 1,296 square feet at 1/4 inch.

Lawn area1/8 in1/4 in3/8 in1/2 in
1,000 sq ft0.4 yd³0.8 yd³1.2 yd³1.5 yd³
2,500 sq ft1.0 yd³1.9 yd³2.9 yd³3.9 yd³
5,000 sq ft1.9 yd³3.9 yd³5.8 yd³7.7 yd³
10,000 sq ft3.9 yd³7.7 yd³11.6 yd³15.4 yd³
20,000 sq ft7.7 yd³15.4 yd³23.1 yd³30.9 yd³

Delivery has a 10-yard minimum, which topdresses about 13,000 square feet at 1/4 inch or 6,500 square feet at 1/2 inch. For a smaller lawn, plan two or three passes over the season from the same pile, or use the extra to fill beds and low spots. Cover the pile with a tarp so it stays dry and spreadable. The topsoil calculator handles any area and depth.

Step-by-step: how to topdress a lawn

  1. Mow low. Mow one notch lower than normal and bag the clippings so the material can reach the soil.
  2. Dethatch or aerate if needed. Core aeration right before topdressing helps on compacted clay.
  3. Mark the low spots. Flag the dips so you know where to put extra.
  4. Spread the material. Use a shovel and wheelbarrow to drop small piles, or a drop spreader or peat-moss-style roller spreader for an even coat.
  5. Work it in. Drag a leveling rake or the back of a landscape rake across the lawn until the grass blades show through and the material sits down in the turf and the dips.
  6. Water lightly. Settle the material in with a gentle watering. Do not flood it.
  7. Repeat as needed. Wait until the grass has grown through (often 2–4 weeks in summer), then add another thin pass to deeper spots.

Common topdressing mistakes

  • Going too thick in one pass and smothering the grass.
  • Topdressing dormant warm-season turf in early spring or fall.
  • Spreading wet, clumpy soil.
  • Using topdressing to fix a drainage problem. Water against the foundation needs grading, not a thin layer. See fixing drainage problems.

Order topdressing material

Screened topsoil is delivered starting at $17/yd and sand starting at $22/yd in DFW (Denver: $22 and $27). Text your address, lawn size and which material you want to (469) 253-2403 (DFW) or (720) 577-5016 (Denver). Use the sand calculator or topsoil calculator to size the order.

Need Fill Dirt Delivered?

Text us your project details for a quote in minutes.

Text for Instant Quote

Frequently Asked Questions

Usually 1/4 to 1/2 inch per pass, and never more than about half the grass blade height. Fill deeper dips with several thin passes a few weeks apart.

In DFW and North Texas, topdress bermuda, zoysia and St. Augustine from late spring through summer, roughly May through August, when the grass is actively growing.

About 0.8 cubic yards at 1/4 inch deep or 1.5 cubic yards at 1/2 inch deep.

Use material similar to the soil under your lawn. On typical North Texas clay-loam lawns, screened topsoil or a topsoil-sand mix is common; pure sand fits sandy soils and sand-based turf.

Yes, but go light, about 1/4 inch per pass, during summer when it is actively growing. Its coarse, dense blades can be smothered by heavy layers.

Your project starts with
the right dirt.

Text us what you need. Quoted in minutes. Delivered in hours.

Text for instant quote

Mon–Sat 7am–5pm · Responses in minutes