Short answer: bulk sand typically costs $15 to $50 per cubic yard delivered, according to national cost guides like HomeGuide. By the ton, fill sand commonly runs about $15 to $30, concrete sand about $25 to $50, and mason sand roughly $30 to $55 or more, before delivery. Our delivered sand starts at $22 per cubic yard in DFW and $27 in Denver, with a 10-yard minimum.
Sand pricing is confusing because suppliers mix units (yards and tons) and mix delivered and pickup prices. This guide lines those up so you can compare.
How much does sand cost per cubic yard?
| Sand type | Typical per ton (material) | Typical per yd³ (material) | Common uses |
|---|---|---|---|
| Fill sand | $15–$30 | $20–$40 | Backfill, leveling, pipe bedding, under slabs |
| Concrete sand (coarse, washed) | $25–$50 | $35–$65 | Paver base layer, concrete mixing, drainage |
| Mason sand (fine, washed) | $30–$55+ | $40–$75+ | Mortar, setting pavers, smooth top layers |
These are typical market ranges reported by national and supplier cost guides, before delivery, and they vary by region. A full delivered order in many markets runs a few hundred dollars once trucking is added. Our published price is for sand delivered, starting at $22 per yard in DFW and $27 in Denver, with delivery included in the per-yard number. Availability of a specific grade depends on the local source, so tell us the use and we will confirm what we can bring.
How much does sand cost per ton?
Sand weighs about 1.3 to 1.5 tons per cubic yard dry (roughly 2,600 to 3,000 lbs). Damp sand weighs more. To convert, divide the per-yard price by about 1.4.
| Price per yard | Approximate price per ton (at 1.4 t/yd) |
|---|---|
| $20/yd | about $14/ton |
| $22/yd | about $16/ton |
| $30/yd | about $21/ton |
| $40/yd | about $29/ton |
| $50/yd | about $36/ton |
If your plans or a supplier give tonnage, the tons to cubic yards calculator converts it.
Why do types of sand cost different amounts?
The price follows the processing. Fill sand is often sold close to how it comes out of the ground, with some fines and clay. Concrete sand is washed and graded to a coarse, consistent particle size. Mason sand is washed and screened finer still. More washing and screening means more cost at the pit.
For which sand fits which job, see types of sand for construction and landscaping and fill dirt vs sand.
How much does a truckload of sand cost?
At our published starting prices:
| Truck | Capacity | DFW ($22/yd) | Denver ($27/yd) | Approx. weight |
|---|---|---|---|---|
| Tandem | 10 yd³ | $220 | $270 | 13–15 tons |
| Tri-axle | 16 yd³ | $352 | $432 | 21–24 tons |
| End dump | 18 yd³ | $396 | $486 | 23–27 tons |
See how much a dump truck load of dirt costs for the same table across every material.
Is sand cheaper than fill dirt?
No. Sand usually costs more per yard than common fill dirt and weighs more, so trucks carry more tons per load. In DFW our fill dirt starts at $10 per yard and sand at $22. Use sand where it does a job dirt cannot: drainage, bedding pipe, or a level base under pavers. Use fill dirt for bulk grade raises.
How much sand do I need?
One cubic yard covers 324 square feet at 1 inch deep, 108 square feet at 3 inches, and 81 square feet at 4 inches. A typical paver bedding layer is about 1 inch, so a 324 square foot patio needs about one yard of bedding sand. Pipe bedding and backfill jobs use far more.
| Project | Typical depth | Coverage per yd³ |
|---|---|---|
| Paver bedding layer | 1" | 324 ft² |
| Leveling under a pool liner or slab | 2–3" | 108–162 ft² |
| Sandbox or play area | 6–12" | 27–54 ft² |
Run your numbers in the sand calculator, which gives cubic yards and tons for your area and depth. For irregular shapes, the cubic yards calculator works for any material.
How to keep sand costs down
- Buy the grade the job needs. Do not pay for washed sand in a trench backfill.
- Order full loads. Most suppliers have a minimum; ours is 10 yards.
- Compare delivered prices. A cheap per-ton price plus a delivery fee can cost more than a higher delivered per-yard price.
- Combine materials. If you also need fill or gravel, schedule them together so the job is planned around one set of deliveries.
What drives the price of sand?
Processing
Washing removes clay and silt; screening sets the particle size. Each step adds cost at the pit, which is why washed, graded sands cost more than fill sand.
Local geology
Sand is mined from local deposits. Where good deposits sit close to town, sand is cheaper. Where sand has to be trucked in from farther away, the haul shows up in the price. This is why sand prices vary more by region than fill dirt prices do.
Weight and trucking
Sand is heavier than fill dirt and topsoil, so a load of sand puts more tons on the truck. Haul distance matters as much for sand as for any bulk material.
Quantity and minimums
As with every bulk material, small orders cost more per yard. A full load spreads the trucking cost across more yards.
Sand vs bagged sand: what is the difference in cost?
Bagged sand is usually sold in 0.5 cubic foot bags (about 50 lbs). It takes 54 of them to make one cubic yard. Even at a low bag price, that adds up to several times the cost of bulk sand per yard. Bags make sense for a sandbox top-up or a small paver repair. For a patio base, pipe bedding or anything over about a yard, bulk is the better buy. See bagged vs bulk for the full bag math.
Common sand ordering mistakes
- Using sand where gravel belongs. Under pavers, the structural base is usually compacted crushed stone or road base, with only a thin sand bedding layer on top. Check the gravel calculator for the base layer.
- Forgetting compaction. Sand settles when compacted and wetted. Add about 10 to 15% for bedding and backfill.
- Mixing up tons and yards. A ton of sand is less than a cubic yard. Confirm the unit before you compare prices.
Get sand delivered
Text the use, the yardage and your address. DFW and Texas: text (469) 253-2403. Denver: text (720) 577-5016. Sand starts at $22 per yard delivered in DFW and $27 in Denver, 10-yard minimum.